VibrationWorld DVC-8 Controller

Select from the following list to download software:

These are the latest demonstration programs and software upgrades available for the DVC-8 Vibration Controller. The Demo software and full programs are self-executing; unzip the folder and click on Setup. Save the downloaded individual upgrade files in a temporary folder to be sure the transfer is complete, and then copy the new files over the existing ones in the C:\Program Files\DVC8 folder to complete the upgrade. Check in HELP|ABOUT SOFTWARE in each program to verify installation.

• VibrationWorld DVC-8 Demo software (DVC8V2404Demo, Ver.2.404, 5/01/10, 1.26 Mb.).

· VibrationWorld V2.41 software ( DVC8V241Setup.Zip, Ver.2.41, 2/01/2013, 1.78 Mb.)

 Individual Program Upgrades For Serial Numbers Above 500:

• VibrationWorld Sine executable ( DVC8DSC.EXE, Ver. 2.411 4/05/2013, 692 Kb.).
• VibrationWorld Random executable ( DVC8DRC.EXE, Ver. 2.411 4/05/2013, 936 Kb.).
• VibrationWorld Shock executable ( DVC8CSC.EXE, Ver. 2.411 4/05/2013, 772 Kb.).
• VibrationWorld Introductory Screen ( DVC8.EXE, Ver. 2.41, 2/01/2013, 52 Kb.).

Common Files:

• Random software Help file ( Dvc8drc.hlp, 6/01/11, 66 Kb.).
• Sine software Help file ( Dvc8dsc.hlp, 2/01/10, 51 Kb.).
• Shock software Help file ( Dvc8csc.hlp, 2/01/10, 55 Kb.).
• DVC-8 Software Introduction ( Dvc8Intro.htm 9/21/10, 46 Kb.).
• DVC-8 QuickStart Instructions ( Dvc8QuickStart.pdf, 3/20/09, 33 Kb.).
• IOTech DaqCom2Setup ( DaqCom2Setup, 4/2/2010, 26 Mb.).

Revised 4/07/2013